Cut/MMA-40 Factory 230V Electric Plasma Carbon Steel Vertical Cutting Machine

Short Description:

Plasma cutting machine with different working gases can cut all kinds of metals that are difficult to cut with oxygen, especially for non-ferrous metals (stainless steel, aluminum, copper, titanium and nickel); Its main advantage is that when cutting metal with small thickness, the plasma cutting speed is fast, especially when cutting ordinary carbon steel sheet, the speed can reach 5 ~ 6 times of oxygen cutting method, the cutting surface is smooth, the thermal deformation is small, and there is almost no heat affected zone.

Product Detail

Product Tags

Plasma cutting machine is a metal cutting machine, which needs compressed air and oxygen. Library plasma cutting machine is mainly used to cut thick stainless steel plates that cannot be cut by oxyacetylene flame or cut by plate shears. Its processing is basically one of them. Plasma cutting machine can be used for cutting stainless steel, aluminum, copper, cast iron, carbon steel and other metal materials. It not only has fast cutting speed, narrow cutting seam, flat incision, small heat affected zone, low workpiece deformation and simple operation, but also has remarkable energy-saving effect. Plasma cutting machine is applicable to the manufacturing, installation and maintenance of various mechanical and metal structures, as well as the cutting and processing of medium and thin plates, such as cutting, drilling, patching, beveling, etc. Plasma is suitable for sheet cutting and medium-sized sheet! If it is NC or track cutting with coordinates, flame cutting can also be added to cut medium and thick plates, and finally 400mm steel plates! Plasma cutting machine can cut all conductive non-ferrous metals. General metals such as copper, iron and stainless steel can be cut, including pig iron. If the main material processed here is pig iron, the processing volume is also large. You can choose CNC plasma cutting machine, which can effectively improve production efficiency. However, you should pay attention to the model of plasma cutting machine you use and the thickness it can cut

Input Power Voltage V 230V,1Ph
Frequency Hz 50/60
Rated Input Capacity KVA 4.9
Output Current (MMA) A 20-170
Output Current (CUT) A 20-40
No-Load Voltage V 280
Rated Duty Cycle (25 degree) % 60%
Power Factor COS 0.93
Air Pressure Bar 2-6
Temperature Protection 75 degree
Protective Grade of Housing IP23
Suitable For Electrode mm 1.6-4.0
Max Cutting Thickness mm 15
Clean Cutting Thickness mm 8
Power Supply Cable 4 mm2,4core  with 3 meters
Accessories 4 meters S45 central connector cutting torch,regulator,mask,brush,tube.3 meters welding clamp,3 meters earth clamp
Packing Size cm 45*25*40
G.W Kg 12
N.W Kg 10
Generator Friendly yes,above 30 Kw

Standard Packing List



-Adopt advanced IGBT Module Technology
-Un-touch start system
-Rapid arc strike
-Competitive Cutting Thickness
-Cool Operation,Long consumable life
-Engine drive compatible
​-Energy saving
-Rapidaly cutting materials like Broze,Ss,Metal and so on
Accessories: 4 meters A101 central connector cutting torch,regulator,mask,brush,tube.3 meters welding clamp,3 meters earth clamp

  • Previous:
  • Next:

  • Write your message here and send it to us