MIG-200s 4 in 1 Multifunction Digital Inverter Gas Shielded MIGMMATIG Welder

Short Description:

Colour LCD display

Multi-Function MIG/TIG/MMA all in one

Smart Synergy setting mode

Good welding performance for steel,stainless steel ,aluminium

2T/4T easy for operation

Product Detail

Product Tags

C02 gas shielded arc welding uses welding wire instead of welding rod, which is sent to the welding gun through the wire feeding hose through the wire feeding wheel and conducted through the conductive nozzle. In CO2 atmosphere, an arc is generated with the base metal and welded by arc heat.

During operation, CO2 gas is sprayed around the welding wire through the welding gun nozzle, creating a local gas protective layer around the arc, mechanically isolating the solution droplets and solution pool from the air, so as to protect the stable and continuous welding process and obtain high-quality welds.

① . fast welding speed:The melting speed of welding wire per unit time is twice that of manual arc welding

② Wide welding range:It can be used for all-round welding of low carbon steel, high strength steel and ordinary cast steel

③ . good arc striking performance:Energy concentration, easy arc striking, continuous wire feeding arc without interruption.

④ . large dissolving depth:The penetration depth is three times that of manual arc welding, and the groove processing is small

⑤ Good welding quality:Insensitive to rust, low hydrogen content in weld, good crack resistance and small thermal deformation.

⑥ . high deposition efficiency (deposition: weld metal formed after metal melting) The deposition efficiency of manual arc welding electrode is 60% ,The deposition efficiency of CO2 welding wire is 90%

⑦ . compared with manual welding: poor wind resistance and complex equipment

Input Power Voltage V 230V,1Ph
Frequency Hz 50/60
Rated Input Capacity KVA 6.6
Output Current (MMA) A 20-170
Output Current (MIG) A 30-200
Output Current (Lift TIG) A 10-200
No-Load Voltage V 60
Rated Duty Cycle (25 degree) % 60%
Power Factor COS 0.93
Temperature Protection   75 degree
Protective Grade of Housing   IP23
Suitable For Electrode mm 2.5-4.0
suitable For wire mm 0.8-1.0
Power Supply Cable    2 meters 2.5mm power cable
Plug   Brazil plug
Wire feeder   2 rolls ,1/5Kg wire spool inside
Packing Size cm 49.5*24.5*41
G.W Kg 15
N.W Kg 10
Generator Friendly   yes,above 20 Kw

Standard Packing List


-Full digital and advanced IGBT inverter technology

-Multi-process:MIG-mixed gas,MIG-CO2(Faws),MMA&LIFT TIG

-Synergic control,LED display,easy to operate

-Mixed gas and CO2 gas selectable  under MIG process

-FAWS technology,low spatter under MIG-CO2 mode when welding solid carbon steel wire

-Spot welding function is available

-Inductance and arc length can be finely adjusted

-2T/4T function,abundant modes to serve for various welding demands

-Polarity change function inside,weld with no gas protection in this function by using flux-cored self-shield wire

-Fan as needed,reduces noise and dust inside the machine

-1KG/5KG spool adaptive,enrich the choice of different spool

-Intelligent protection;VRD ,over-heating,over-current,convoy for the welder to keep power

  • Previous:
  • Next:

  • Write your message here and send it to us