submersible cutter pumps for sewage and wastewater, which are made of castings and equipped with cutting mechanism. Featuring a combination of impeller vane with brazed sintered tungsten carbide alloy edge and a suction cover of serrated shape, the C-series pumps enable smooth pumping, while cutting fibrous foreign objects during suction. These pumps have been used to drain sewage and wastewater from buildings and kitchens, and to transfer sewage and wastewater in water treatment facilities of factories and commercial complexes.

The C-series comes in a wide product lineup, covering discharge bore diameters of 50 to 200 mm and motor outputs of 0.75 to 37 kW. Among the C-series pumps, “CR” models are available as highly-durable cutter pumps, whose impeller and suction cover are made of high-chromium cast iron as a standard feature. All models of the C-series can be used in combination with a guide rail fitting device that enables easy installation and maintenance. In addition, a new model of dry pit type is optionally available. The dry pit type pump can be installed indoors, and outside a tank. With Tsurumi’s original specifications for dry pit, the dry pit pump delivers the performance of conventional submersible pumps in a variety of sites.

These pumps integrate original technologies that Tsurumi has researched and proven in the field over many years, such as anti-wicking cable, dual inside mechanical seals with silicone carbide face and Oil Lifter, etc. Furthermore, durability and wear resistance have been thoroughly considered in their design, so these pumps enable continuous duty over long periods of time.
Tsurumi products are designed to provide excellent durability and sound quality, thus contributing to the stable operation of facilities and enabling a considerable reduction in maintenance cost.

Identification Code

4SM5-4F

4:Well diameter:4^w

S:submersible pump model

M:Single phase motor(three phase without M)

2:Capacity(m³/h)

8:Stage

F:Motor filled with oil

Fields of Application

For water supply from wells or reservoir

For domestic use, for civil and industrial application

For garden use and irrigation

Technical Data

Suitable fluids

Clearjree from solid or abrasive substances

Chemically neutral and close to the characteristics of water

Performance

Speed range:2900rpm

Fluid temperature rangei-IOT -40^

Max.Working pressure:50 bar

Ambient Temperature

Permissible up to 40P

Power

Single phase: 1 ~240V/50Hz,60Hz

Three-phase:380V-415V/50Hz,60Hz

Features

Good-looking appearance and all the fluid-passing components of both the submerged pump and the submerged motor are made of stainless steel.

Low weight and convenient in movement and installation

High efficiency, save elecricity.

Privided with non-return valve to avoid damage due to back-flow of water at shutd of pump or water hammer affecting the pump

The liquid inlet is fixed with a filter screen to prevent solid grain of a given size from entrance.

Motor

Degree of protection: IP68

Insulation class:B

Construction Materials

Casing both of pump and motor, pump shaft:stainless

steel AISI304

Impeller and diffusenstainless steel

Accessories

Conreol switch, waterproof glue.